Toolbox Trends logoToolbox Trends
  • Table Saws
  • Circular Saws
  • About Us
  • Table Saws
  • Circular Saws
  • About Us
Table of contents
Table of contents

Bosch CS10 vs. DeWalt DCS571B

Shopping for a new circular saw? Compare the benefits of the Bosch CS10 and DeWalt DCS571B and make an informed purchase!

Lets take a look at these two circular saws: the Bosch CS10 and the DeWalt DCS571B.

Bosch CS10
DeWalt DCS571B

Features & Benefits

You can read more in our roundup of the best compact circular saws and the best full-size circular saws.

Power & Motor

The CS10 is corded, runs on 120 V, and draws 15 amps. In the U.S., standard residential circuits are 120 V, 15 A, which will support the.

The DCS571B is cordless and runs on 20 V batteries.

The CS10 motor spins at 5600 rpm and the DCS571B motor spins at 4500 rpm. Dont get too caught up in these numbers, since the manufacturers measure them under ideal conditions, and they dont have a direct impact on the saws real-world ability to handle different material.

The CS10 has a direct-drive motor. Direct-drive motors are usually lighter than other styles, but their side mounting makes the saw a little harder to control.

Blades & Capacity

The CS10 takes 7 1/4 diameter blades and has a 5/8 arbor. The DCS571B accepts 4 1/2 diameter blades and has a 3/8 arbor. Most 8-to-10blades have a 5/8arbor hole, so this size of arbor wont limit your options.

The CS10 can bevel the blade up to 56°, can cut up to 2 7/16 at 90°, and will cut up to 1 7/8 deep at a 45° angle. The DCS571B can bevel up to 45° and is able to cut up to 1 9/16 at an angle of 90°.

When beveling the saw, most circular saws will have positive stops at common angles such as 45° and 90°. This ensures you are making precise cuts. Some saws have additional stops at other angles.

The Bosch has stops at 22.5° and 45°. The DeWalt has stops at 90 Degrees.

The Bosch has the blade on the right side of the saw. The DeWalt has the blade on the left side of the unit. Right-handers sometimes find it easier to see and control blades mounted to the left, while left-handers might find the same true for right-mounted blades.

Pros & Cons

Lets take a look at some of the pluses and minuses of these products.

For the Bosch:

Pros

  • Not as heavy as some competitors
  • Quality blade included in package
  • Rafter hook for hanging when not in use

Cons

  • Plastic adjustment levers could break with rough use

For the DeWalt:

Pros

  • As powerful as corded circular saws
  • Easy to hold and maneuver one-handed

Cons

  • Dust port adapter tends to fall off during use

Comparison Chart

Below is a full side-by-side comparison of these productsspecs. You can view comparisons of the Bosch CS10 with other products

and comparisons of the DeWalt DCS571B with other products.

Bosch CS10DeWalt DCS571B
Bosch CS10
DeWalt DCS571B
BrandBoschDeWalt
Power Typecordedcordless
Power - Voltage120 V20 V
Power - Amps15 A
No-load RPM5600 rpm4500 rpm
Blade Diameter7 1/4”4 1/2”
Maximum Bevel56°45°
Depth of Cut (at 90°)2 7/16”1 9/16”
Depth of Cut (at 45°)1 7/8”
Arbor Size5/8”3/8”
Dimensions18” L × 10” H5 1/8” W × 17.6” L × 6.687” H
Weight10.2 lbs6.6 lbs
Blade - Siderightleft
Drive Mechanismdirect-drive
Stops22.5° and 45°90 Degrees
Warranty1 year3 Year Limited Warranty
Pros
  • Not as heavy as some competitors
  • Quality blade included in package
  • Rafter hook for hanging when not in use
  • As powerful as corded circular saws
  • Easy to hold and maneuver one-handed
Cons
  • Plastic adjustment levers could break with rough use
  • Dust port adapter tends to fall off during use
As an Amazon Associate, I earn from qualifying purchases.