Bosch 4100-10 vs. Skil TS6307-00

Let’s compare these two table saws: the Bosch 4100-10 and the Skil TS6307-00. To get more detailed information, read our full review of the Bosch 4100-10.

NOTE: The 4100-10 has been discontinued. You may want to consider looking into alternatives. Some alternatives to the Bosch 4100-10 include the Bosch 4100XC-10, DeWalt DWE7491RS, and Metabo HPT C10RJS.

Features & Benefits

For more information, read our complete guide to buying a table saw.

Related: Table Saw Buying Guide: What to Look For

Power & Motor

Both saws are corded, require 120 V, and draw 15 amps. Standard U.S. residential circuits are 120 V, 15 A, which will support either of the table saws.

The 4100-10 motor produces 3650 rpm and the TS6307-00 motor produces 4600 rpm. But don’t pay too much attention to these numbers, because the manufacturers measure them under no-load conditions, and they don’t have a strong impact on the saw’s real-world ability to handle different material.

Blade Compatibility

Both products take 10” diameter saw blades and have a 5/8” arbor. 10” is a very common diameter of table saw blade, which means it shouldn’t be a problem to find a huge assortment of blades to suit your needs. Most 8-to-10” blades have a 5/8” arbor hole, so this size of arbor won’t limit your choices.

The Bosch accepts dado blades up to 13/16” thick. The Skil takes dado blades up to 5/8” thick.

Size & Capacity

The Bosch has 25” of rip capacity on the right of the blade and has 8 1/2” of rip capacity on the left side. The Skil has 25 1/2” of rip capacity on the right of the blade and has 14” of rip capacity on the left side. In general, more rip capacity is better, but it often also means a larger and heavier saw. Think about how big of rip cuts you’ll be making to help choose the right size saw for you.

Both saws can bevel their blades up to 47° and can cut up to 2 1/2” at an angle of 45°. The 4100-10 is able to cut up to 3 1/8” deep at a 90° angle. The TS6307-00 will cut up to 3 1/2” at 90°.

The table on the Bosch is 29” wide and 21 1/2” deep. The table on the Skil is 24” wide and 25” deep.

Pros & Cons

Let’s take a look at some of the pluses and minuses of these products.

For the 4100-10:

For the Skil:

Comparison Chart

Below is a full side-by-side look at these products’ specs. If you want more details, go to our full review of the Bosch 4100-10. You can view comparisons of the Bosch 4100-10 with other products

	Bosch 4100-10	Skil TS6307-00
Brand	Bosch	Skil
Power Type	corded	corded
Power - Voltage	120 V	120 V
Power - Amps	15 A	15 A
Table Dimensions	29” W × 21 1/2” D	24” W × 25” D
Miter Slot Dimensions	3/4” W × 3/8” D	3/4” W × 3/8” D
No-load RPM	3650 rpm	4600 rpm
Rip Capacity (Right)	25”	25 1/2”
Rip Capacity (Left)	8 1/2”	14”
Blade Diameter	10”	10”
Maximum Bevel	47°	47°
Depth of Cut (at 90°)	3 1/8”	3 1/2”
Depth of Cut (at 45°)	2 1/2”	2 1/2”
Maximum Dado Width	13/16”	5/8”
Arbor Size	5/8”	5/8”
Weight	92 lbs (with stand)	51.2 lbs
Pros	Best-in-class portable stand is easy to move and operate Durable construction of saw, stand, and wheels On-board storage for all accessories including fence and miter gauge Rip capacity is adequate for cutting 4’ wide sheet goods in half	Integrated folding legs make storage easy Adjustable leg for uneven ground or floors Safety features are easy to remove and replace when cutting dados or using a sled
Cons	Miter gauge can have sloppy fit Coating on aluminum table might wear off over extended uses Design allows sawdust to accumulate in case and motor if no vacuum attached	Miter gauge face is not square to table Rip fence can wiggle and require readjustment
Included Accessories	10” 24-tooth blade Wheeled stand Smart Guard system Adjustment wrenches Rip fence	Table saw with integrated folding legs Blade guard Push stick Miter gauge Anti-kickback pawls Dust port elbow Wrenches Riving blade Rip fence 24-tooth blade
Other Notes	Replaced by the Bosch 4100XC-10
	Check Price	Check Price