Ridgid R4520 vs. Skil TS6307-00
Looking for a new table saw? Compare the features of the Ridgid R4520 and Skil TS6307-00 in order to make an informed purchase!
We’ll take a look at these two table saws: the Ridgid R4520 and the Skil TS6307-00.
Features & Benefits
You can read more in our complete guide to buying a table saw.
Related: Table Saw Buying Guide: What to Look For
Power & Motor
Both saws are corded and run on 120 V. The R4520 draws 13 amps. The TS6307-00 draws 15 amps. Standard U.S. residential circuits are 120 V, 15 A, which will support either of the products.
The R4520 has a motor that spins at 3450 rpm and the TS6307-00 has a motor that spins at 4600 rpm. But you shouldn’t get too caught up in the RPM numbers, since the manufacturers test them under ideal conditions, and they don’t have a meaningful correlation with the saw’s real-world ability to handle various types of material.
Blade Compatibility
Both table saws take 10” diameter blades and have a 5/8” arbor. Ten inches is the most common size for table saw blades, so it won’t be a problem to find a huge variety of blades for any purpose. Most 8-to-10” blades have a 5/8” arbor hole, so this size arbor maximizes blade compatibility.
The Ridgid accepts dado blades up to 13/16” thick and 6” in diameter. The Skil takes dado blades up to 5/8” thick.
Size & Capacity
The Ridgid has 30” of rip capacity on the right side of the blade and has 15” of rip capacity on the left. The Skil has 25 1/2” of rip capacity on the right side and has 14” of rip capacity on the left of the blade. In general, more rip capacity is better, but it often also means a larger, heavier saw. Think about how big of rip cuts you’ll be making to help choose the right size saw for you.
The R4520 can bevel its blade up to 4°, can cut up to 3 1/4” at a 90° angle, and can cut up to 2 1/4” deep at a 45° angle. The TS6307-00 can bevel up to 47°, can cut up to 3 1/2” at a 90° angle, and can cut up to 2 1/2” deep at a 45° angle.
The table on the Ridgid is 40” wide and 27” deep. The table on the Skil is 24” wide and 25” deep.
Pros & Cons
Let’s take a look at some of the pluses and minuses of these products.
For the R4520:
Pros
- Cast iron table for maximum precision
- Usually available at a very good price
- Stable and nearly vibration-free
Cons
- Occasional reports of defective trunnions causing alignment problems
For the Skil:
Pros
- Integrated folding legs make storage easy
- Adjustable leg for uneven ground or floors
- Safety features are easy to remove and replace when cutting dados or using a sled
Cons
- Miter gauge face is not square to table
- Rip fence can wiggle and require readjustment
Comparison Chart
Below is a full side-by-side look at these products’ specs. You can view comparisons of the Ridgid R4520 with other products
| Ridgid R4520 | Skil TS6307-00 | |
|---|---|---|
| | |
| Brand | Ridgid | Skil |
| Power Type | corded | corded |
| Power - Voltage | 120 V | 120 V |
| Power - Amps | 13 A | 15 A |
| Table Dimensions | 40” W × 27” D | 24” W × 25” D |
| Miter Slot Dimensions | 3/4” W × 3/8” D | 3/4” W × 3/8” D |
| No-load RPM | 3450 rpm | 4600 rpm |
| Rip Capacity (Right) | 30” | 25 1/2” |
| Rip Capacity (Left) | 15” | 14” |
| Blade Diameter | 10” | 10” |
| Maximum Bevel | 4° | 47° |
| Depth of Cut (at 90°) | 3 1/4” | 3 1/2” |
| Depth of Cut (at 45°) | 2 1/4” | 2 1/2” |
| Maximum Dado Width | 13/16” | 5/8” |
| Arbor Size | 5/8” | 5/8” |
| Dust Port Diameter | 4” | |
| Weight | 267 lbs | 51.2 lbs |
| Warranty | lifetime; if registered within 90 days of purchase | |
| Pros |
|
|
| Cons |
|
|
| Included Accessories |
| |