DeWalt DCS7485T1 vs. DeWalt DWE7480
Thinking about a new table saw? Compare the benefits of the DeWalt DCS7485T1 and DeWalt DWE7480 and make an informed purchase!
Let’s take a look at these two DeWalt table saws: the DeWalt DCS7485T1 and the DeWalt DWE7480. To get more details, check out our full review of the DeWalt DWE7480.
NOTE: The DWE7480 has been discontinued. You might consider looking into similar products.
Features & Benefits
You can check out our complete guide to buying a table saw.
Related: Table Saw Buying Guide: What to Look For
Power & Motor
The DWE7480 is corded, runs on 120 V, and draws 15 amps. Standard U.S. residential circuits are 120 V, 15 A, which will support the.
The DCS7485T1 is cordless and runs on 60 V batteries.
The DCS7485T1 motor spins at 5800 rpm and the DWE7480 motor spins at 4800 rpm. Don’t get too caught up in these numbers, since the manufacturers measure them under ideal conditions, meaning they don’t have a meaningful impact on the saw’s real-world capacity to handle different material.
Blade Compatibility
Both saws have a 5/8” arbor. The DCS7485T1 accepts 8 1/4” diameter blades. The DWE7480 takes 10” diameter blades. 10” is the most common diameter for table saw blades, so it shouldn’t be a problem to find a wide variety of blades to suit your needs. Most 8-to-10” blades have a 5/8” arbor hole, so this size of arbor won’t limit your options.
Neither product can handle dado blades. If you’re a woodworker, this might be a significant shortcoming. If you anticipate wanting to use dado blades, consider loooking at a different model.
Size & Capacity
Both products have 12” of rip capacity to the left side of the blade. The DCS7485T1 has 24” of rip capacity to the right. The DWE7480 has 24 1/2” of rip capacity to the right side. As a rule, a larger rip capacity is better, but it typically also means a larger and heavier saw. Think about what types of rip cuts you’ll be making and choose the right size saw for you.
Both table saws can bevel their blades up to 45°. The DCS7485T1 is able to cut up to 2 1/2” deep at an angle of 90° and can cut up to 1 3/4” at 45°. The DWE7480 will cut up to 3 1/8” deep at a 90° angle and is able to cut up to 2 1/4” at an angle of 45°.
The table on the DWE7480 has a width of 23 1/2” and a depth of 23 3/4”.
Pros & Cons
Let’s take a look at some of the pluses and minuses of these products.
For the DWE7480:
Pros
- Compact size and light weight
- Respectable 24 1/2” rip capacity
- Precise rack-and-pinion fence
Cons
- Small table
- Mediocre miter gauge
- No included stand
- Can’t accept dado sets
Comparison Chart
Below is a full side-by-side comparison of these products’ specs. For more details, go to our full review of the DeWalt DWE7480. You can view comparisons of the DeWalt DCS7485T1 with other products
| DeWalt DCS7485T1 | DeWalt DWE7480 | |
|---|---|---|
| | |
| Brand | DeWalt | DeWalt |
| Power Type | cordless | corded |
| Power - Voltage | 60 V | 120 V |
| Power - Amps | n/a | 15 A |
| Table Dimensions | 23 1/2” W × 23 3/4” D | |
| Miter Slot Dimensions | 3/4” W × 3/8” D | 3/4” W × 3/8” D |
| No-load RPM | 5800 rpm | 4800 rpm |
| Rip Capacity (Right) | 24” | 24 1/2” |
| Rip Capacity (Left) | 12” | 12” |
| Blade Diameter | 8 1/4” | 10” |
| Maximum Bevel | 45° | 45° |
| Depth of Cut (at 90°) | 2 1/2” | 3 1/8” |
| Depth of Cut (at 45°) | 1 3/4” | 2 1/4” |
| Maximum Dado Width | ||
| Arbor Size | 5/8” | 5/8” |
| Dust Port Diameter | 2 1/4” | |
| Weight | 48 lbs | 45 lbs (without optional stand) |
| Pros |
| |
| Cons |
| |
| Included Accessories |
|
|
| Other Notes | Discontinued | |