DeWalt DCS7485T1 vs. Ryobi RTS12

Let’s compare these two table saws: the DeWalt DCS7485T1 and the Ryobi RTS12. To get more detailed information, read our full review of the Ryobi RTS12.

Features & Benefits

You can read our complete guide to buying a table saw.

Related: Table Saw Buying Guide: What to Look For

Power & Motor

The RTS12 is corded, runs on 120 V, and draws 15 amps. Standard U.S. residential circuits are 120 V, 15 A, which will support the.

The DCS7485T1 is cordless and requires 60 V batteries.

The DCS7485T1 motor produces 5800 rpm and the RTS12 motor produces 5000 rpm. But don’t pay too much attention to these numbers, because the manufacturers measure them under no-load conditions, so they don’t have a strong impact on the saw’s real-world capability to handle different material.

Blade Compatibility

Both table saws have a 5/8” arbor. The DCS7485T1 accepts 8 1/4” diameter saw blades. The RTS12 takes 10” diameter blades. Ten inches is the most common size for table saw blades, so you’ll be able to find a large variety of blades to suit your needs. Most 8-to-10” blades have a 5/8” arbor hole, so this size arbor gives you a variety of options.

The Ryobi accepts dado blades up to 1/2” thick. The DCS7485T1 doesn’t accept dado blades. If you’re a woodworker, this might be a major shortcoming. If you might want to use dado blades, you might want to look at a different model.

Size & Capacity

The DeWalt can rip up to 24” of material on the right side of the blade and has 12” of rip capacity on the left. The Ryobi has 12” of rip capacity on the right side and has 8” of rip capacity on the left. As a rule, a larger rip capacity is better, but it often also means a larger (and heavier) saw. Think about how big of rip cuts you’ll be making to help choose the right size saw for you.

Both products can bevel the blade up to 45°. The DCS7485T1 will cut up to 2 1/2” deep at 90° and can cut up to 1 3/4” at an angle of 45°. The RTS12 is able to cut up to 3” deep at a 90° angle and will cut up to 2 1/2” at 45°.

The table on the Ryobi is 27.36” wide and 30 1/2” deep.

Pros & Cons

Let’s take a look at some of the pluses and minuses of these products.

For the RTS12:

Comparison Chart

Below is a full side-by-side look at these products’ specs. For more details, check out our full review of the Ryobi RTS12. You can view comparisons of the DeWalt DCS7485T1 with other products

	DeWalt DCS7485T1	Ryobi RTS12
Brand	DeWalt	Ryobi
Power Type	cordless	corded
Power - Voltage	60 V	120 V
Power - Amps	n/a	15 A
Power - HP		3 hp
Table Dimensions		27.36” W × 30 1/2” D
Miter Slot Dimensions	3/4” W × 3/8” D
No-load RPM	5800 rpm	5000 rpm
Rip Capacity (Right)	24”	12”
Rip Capacity (Left)	12”	8”
Blade Diameter	8 1/4”	10”
Maximum Bevel	45°	45°
Depth of Cut (at 90°)	2 1/2”	3”
Depth of Cut (at 45°)	1 3/4”	2 1/2”
Maximum Dado Width		1/2” (with optional throat insert)
Arbor Size	5/8”	5/8”
Dimensions		14” (without stand) H
Weight	48 lbs	51 lbs
Pros		Powerful motor compared to similarly-priced saws Can accept dado blades with optional throat insert
Cons		Stand is not very sturdy, so use caution when operating Only one miter slot limits flexibility and use of jigs and sleds
Included Accessories	60 V MAX battery Fast charger Miter gauge 8 1/4” carbide blade
	Check Price	Check Price