DeWalt DWE7480 vs. Ryobi RTS12

Let’s compare these two table saws: the DeWalt DWE7480 and the Ryobi RTS12. To get more detailed information, read our full reviews of the DeWalt DWE7480 and of the Ryobi RTS12.

NOTE: The DWE7480 has been discontinued. You may want to consider alternatives.

Features & Benefits

For more information, read our complete guide to buying a table saw.

Related: Table Saw Buying Guide: What to Look For

Power & Motor

Both products are corded, require 120 V, and draw 15 amps. Standard U.S. residential circuits are 120 V, 15 A, which will support either of the table saws.

The DWE7480 motor produces 4800 rpm and the RTS12 motor produces 5000 rpm. But don’t pay too much attention to these numbers, because the manufacturers measure them under no-load conditions, and they don’t have a useful impact on the saw’s real-world ability to handle different material.

Blade Compatibility

Both saws accept 10” diameter saw blades and have a 5/8” arbor. 10” is a very common diameter of table saw blade, which means you’ll be able to find a huge assortment of blades for any purpose. Most 8-to-10” blades have a 5/8” arbor hole, so this size of arbor won’t limit your choices.

The Ryobi takes dado blades up to 1/2” thick. The DeWalt can’t handle dado blades. For woodworkers, this could be a significant deficiency. If you’ll want to use dado blades, consider loooking at a different model.

Size & Capacity

The DeWalt has 24 1/2” of rip capacity on the right side of the blade and has 12” of rip capacity on the left. The Ryobi has 12” of rip capacity on the right side and has 8” of rip capacity on the left of the blade. In general, larger rip capacity is better, but it often also means a larger, heavier saw. Think about how big of rip cuts you’ll be making to help choose the right size saw for you.

Both products can bevel up to 45°. The DWE7480 is able to cut up to 3 1/8” deep at a 90° angle and will cut up to 2 1/4” at 45°. The RTS12 can cut up to 3” deep at an angle of 90° and is able to cut up to 2 1/2” at a 45° angle.

The table on the DeWalt is 23 1/2” wide and 23 3/4” deep. The table on the Ryobi is 27.36” wide and 30 1/2” deep.

Pros & Cons

Let’s take a look at some of the pluses and minuses of these products.

For the DWE7480:

For the Ryobi:

Comparison Chart

Here is a full side-by-side look at these products’ specs. For more details, check out our full reviews of the DeWalt DWE7480 and of the Ryobi RTS12. You can view comparisons of the DeWalt DWE7480 with other products

	DeWalt DWE7480	Ryobi RTS12
Brand	DeWalt	Ryobi
Power Type	corded	corded
Power - Voltage	120 V	120 V
Power - Amps	15 A	15 A
Power - HP		3 hp
Table Dimensions	23 1/2” W × 23 3/4” D	27.36” W × 30 1/2” D
Miter Slot Dimensions	3/4” W × 3/8” D
No-load RPM	4800 rpm	5000 rpm
Rip Capacity (Right)	24 1/2”	12”
Rip Capacity (Left)	12”	8”
Blade Diameter	10”	10”
Maximum Bevel	45°	45°
Depth of Cut (at 90°)	3 1/8”	3”
Depth of Cut (at 45°)	2 1/4”	2 1/2”
Maximum Dado Width		1/2” (with optional throat insert)
Arbor Size	5/8”	5/8”
Dust Port Diameter	2 1/4”
Dimensions		14” (without stand) H
Weight	45 lbs (without optional stand)	51 lbs
Pros	Compact size and light weight Respectable 24 1/2” rip capacity Precise rack-and-pinion fence	Powerful motor compared to similarly-priced saws Can accept dado blades with optional throat insert
Cons	Small table Mediocre miter gauge No included stand Can’t accept dado sets	Stand is not very sturdy, so use caution when operating Only one miter slot limits flexibility and use of jigs and sleds
Included Accessories	10” 24-tooth blade Site-Pro modular guard system Miter gauge Rip fence
Other Notes	Discontinued
	Check Price	Check Price