Toolbox Trends logoToolbox Trends
  • Table Saws
  • Circular Saws
  • About Us
  • Table Saws
  • Circular Saws
  • About Us
Table of contents
Table of contents

DeWalt DWE575SB vs. Worx WX429L

Looking for a new circular saw? Compare the benefits of the DeWalt DWE575SB and Worx WX429L in order to make an informed purchase!

Well take a look at these two circular saws: the DeWalt DWE575SB and the Worx WX429L.

DeWalt DWE575SB
Worx WX429L

Features & Benefits

For more information, read more in our roundup of the best compact circular saws and the best full-size circular saws.

Power & Motor

Both products are corded and require 120 V. The DWE575SB draws 15 amps. The WX429L draws 4 amps. In the U.S., standard residential circuits are 120 V, 15 A, which will support either of the saws.

The DWE575SB motor produces 5200 rpm and the WX429L motor produces 3500 rpm. Dont pay too much attention to these numbers, because the manufacturers measure them under no-load conditions, so they dont have a useful impact on the saws real-world capability to handle different material.

The DWE575SB has a direct-drive motor. The WX429L has a direct drive motor. Direct-drive motors are usually lighter than other styles, but their side mounting makes the saw a little harder to control.

Blades & Capacity

The DWE575SB takes 7 1/4 diameter saw blades and has a 5/8 arbor. The WX429L accepts 4 1/2 diameter blades and has a 3/8 arbor. Most 8-to-10blades have a 5/8arbor hole, so this size arbor maximizes blade compatibility.

The DWE575SB can bevel up to 57°, is able to cut up to 2 9/16 deep at an angle of 90°, and can cut up to 2 at 45°. The WX429L can bevel the blade up to 45°, will cut up to 1 11/16 deep at a 90° angle, and is able to cut up to 1 1/8 at an angle of 45°.

When beveling the saw, most circular saws will have positive stops at common angles such as 45° and 90°. This ensures you are making precise cuts. Some saws have additional stops at other angles.

The DeWalt has stops at 22.5°, 45°.

The DeWalt has the blade on the right side of the saw. The Worx has the blade on the left side of the unit. Right-handers sometimes find it easier to see and control blades mounted to the left, while left-handers might find the same true for right-mounted blades.

Pros & Cons

Lets take a look at some of the pluses and minuses of these products.

For the DeWalt:

Pros

  • Electric brake to stop the blade
  • Lighter than many other models
  • Dust blower effective at removing dust

Cons

  • Brake does not stop blade immediately
  • No safety switch

For the WX429L:

Pros

  • Includes rip fence
  • Dust port for connecting to a shop vacuum

Cons

  • Rip fence is tricky to keep accurate when tightening
  • Struggles to cut through full 2x products

Comparison Chart

Below is a full side-by-side look at these productsspecs. You can view comparisons of the DeWalt DWE575SB with other products

and comparisons of the Worx WX429L with other products.

DeWalt DWE575SBWorx WX429L
DeWalt DWE575SB
Worx WX429L
BrandDeWaltWorx
Power Typecordedcorded
Power - Voltage120 V120 V
Power - Amps15 A4 A
No-load RPM5200 rpm3500 rpm
Blade Diameter7 1/4”4 1/2”
Maximum Bevel57°45°
Depth of Cut (at 90°)2 9/16”1 11/16”
Depth of Cut (at 45°)2”1 1/8”
Arbor Size5/8” (round)3/8”
Weight8.8 lbs4.4 lbs
Blade - Siderightleft
Drive Mechanismdirect-drivedirect drive
Stops22.5°, 45°
Motor Typebrushed
Pros
  • Electric brake to stop the blade
  • Lighter than many other models
  • Dust blower effective at removing dust
  • Includes rip fence
  • Dust port for connecting to a shop vacuum
Cons
  • Brake does not stop blade immediately
  • No safety switch
  • Rip fence is tricky to keep accurate when tightening
  • Struggles to cut through full 2x products
As an Amazon Associate, I earn from qualifying purchases.