Toolbox Trends logoToolbox Trends
  • Table Saws
  • Circular Saws
  • About Us
  • Table Saws
  • Circular Saws
  • About Us
Table of contents
Table of contents

DeWalt DWE575SB vs. Skilsaw SPT77WML-01

Shopping for a new circular saw? Compare the benefits of the DeWalt DWE575SB and Skilsaw SPT77WML-01 and make an informed purchase!

Lets take a look at these two circular saws: the DeWalt DWE575SB and the Skilsaw SPT77WML-01.

DeWalt DWE575SB
Skilsaw SPT77WML-01

Features & Benefits

You can read more in our roundup of the best full-size circular saws.

Power & Motor

Both circular saws are corded, run on 120 V, and draw 15 amps. In the U.S., standard residential circuits are 120 V, 15 A, which will support either of the saws.

The DWE575SB motor spins at 5200 rpm and the SPT77WML-01 motor spins at 5300 rpm. Dont get too caught up in these numbers, since the manufacturers measure them under ideal conditions, so they dont have a direct impact on the saws real-world capability to handle different material.

The DWE575SB has a direct-drive motor. The SPT77WML-01 has a worm-drive motor. Direct-drive motors are usually lighter than other styles, but their side mounting makes the saw a little harder to control. Worm-drive motors are longer and heavier, but often more powerful and easier to control due to the weight being more centered.

Blades & Capacity

Both products accept 7 1/4 diameter blades and have a 5/8 arbor. Most 8-to-10blades have a 5/8arbor hole, so this size arbor gives you a lot of options.

The DWE575SB can bevel the blade up to 57°, can cut up to 2 9/16 deep at 90°, and will cut up to 2 at a 45° angle. The SPT77WML-01 can bevel its blade up to 53°, is able to cut up to 2 3/8 deep at an angle of 90°, and can cut up to 1 15/16 at 45°.

When beveling the saw, most circular saws will have positive stops at common angles such as 45° and 90°. This ensures you are making precise cuts. Some saws have additional stops at other angles.

The DeWalt has stops at 22.5°, 45°. The Skilsaw has stops at 45°.

The DeWalt has the blade on the right side of the unit. The Skilsaw has the blade on the left side of the body. Right-handers sometimes find it easier to see and control blades mounted to the left, while left-handers might find the same true for right-mounted blades.

Pros & Cons

Lets take a look at some of the pluses and minuses of these products.

For the DeWalt:

Pros

  • Electric brake to stop the blade
  • Lighter than many other models
  • Dust blower effective at removing dust

Cons

  • Brake does not stop blade immediately
  • No safety switch

For the Skilsaw:

Pros

  • Lots of torque for cutting difficult material
  • Good build quality
  • Blade-left design provides good visibility
  • Easy to track straight cut lines

Cons

  • Heavier than most direct-drive saws

Comparison Chart

Here is a full side-by-side comparison of these productsspecs. You can view comparisons of the DeWalt DWE575SB with other products

and comparisons of the Skilsaw SPT77WML-01 with other products.

DeWalt DWE575SBSkilsaw SPT77WML-01
DeWalt DWE575SB
Skilsaw SPT77WML-01
BrandDeWaltSkilsaw
Power Typecordedcorded
Power - Voltage120 V120 V
Power - Amps15 A15 A
No-load RPM5200 rpm5300 rpm
Blade Diameter7 1/4”7 1/4”
Maximum Bevel57°53°
Depth of Cut (at 90°)2 9/16”2 3/8”
Depth of Cut (at 45°)2”1 15/16”
Arbor Size5/8” (round)5/8”
Dimensions19 1/2” L × 7” H
Weight8.8 lbs11.5 lbs
Blade - Siderightleft
Drive Mechanismdirect-driveworm-drive
Stops22.5°, 45°45°
Motor Typebrushed
Warranty1 year
Pros
  • Electric brake to stop the blade
  • Lighter than many other models
  • Dust blower effective at removing dust
  • Lots of torque for cutting difficult material
  • Good build quality
  • Blade-left design provides good visibility
  • Easy to track straight cut lines
Cons
  • Brake does not stop blade immediately
  • No safety switch
  • Heavier than most direct-drive saws
As an Amazon Associate, I earn from qualifying purchases.