DeWalt DWE575SB vs. Galax Pro GP766V

We’ll take a look at these two circular saws: the DeWalt DWE575SB and the Galax Pro GP766V.

Features & Benefits

You can read more in our roundup of the best compact circular saws and the best full-size circular saws.

Power & Motor

Both products are corded and run on 120 V. The DWE575SB draws 15 amps. The GP766V draws 5.8 amps. Standard U.S. residential circuits are 120 V, 15 A, which will support either of the saws.

The DWE575SB has a motor that spins at 5200 rpm and the GP766V has a motor that spins at 3500 rpm. But you shouldn’t get too caught up in the RPM numbers, since the manufacturers test them under ideal conditions, and they don’t have a meaningful correlation with the saw’s real-world ability to handle various types of material.

Both circular saws have a direct-drive motor. Direct-drive motors are usually lighter than other styles, but their side mounting makes the saw a little harder to control.

Blades & Capacity

The DWE575SB accepts 7 1/4” diameter blades and has a 5/8” arbor. The GP766V takes 4 1/2” diameter saw blades and has a 3/8” arbor. Most 8-to-10” blades have a 5/8” arbor hole, so this size arbor maximizes blade compatibility.

The DWE575SB can bevel the blade up to 57°, can cut up to 2 9/16” at a 90° angle, and can cut up to 2” deep at a 45° angle. The GP766V can bevel up to 45°, can cut up to 1 11/16” at a 90° angle, and can cut up to 1 1/8” deep at a 45° angle.

When beveling the saw, most circular saws will have positive stops at common angles such as 45° and 90°. This ensures you are making precise cuts. Some saws have additional stops at other angles.

The DeWalt has stops at 22.5°, 45°.

The DeWalt has the blade mounted on the right side of the unit. The Galax Pro has the blade mounted on the left side of the unit. Right-handers sometimes find it easier to see and control blades mounted to the left, while left-handers might find the same true for right-mounted blades.

Pros & Cons

Let’s take a look at some of the pluses and minuses of these products.

For the DWE575SB:

For the Galax Pro:

Comparison Chart

Below is a full side-by-side look at these products’ specs. You can view comparisons of the DeWalt DWE575SB with other products

	DeWalt DWE575SB	Galax Pro GP766V
Brand	DeWalt	Galax Pro
Power Type	corded	corded
Power - Voltage	120 V	120 V
Power - Amps	15 A	5.8 A
No-load RPM	5200 rpm	3500 rpm
Blade Diameter	7 1/4”	4 1/2”
Maximum Bevel	57°	45°
Depth of Cut (at 90°)	2 9/16”	1 11/16”
Depth of Cut (at 45°)	2”	1 1/8”
Arbor Size	5/8” (round)	3/8”
Weight	8.8 lbs	6.6 lbs
Blade - Side	right	left
Drive Mechanism	direct-drive	direct-drive
Stops	22.5°, 45°
Motor Type	brushed
Pros	Electric brake to stop the blade Lighter than many other models Dust blower effective at removing dust	Includes both 24- and 40-tooth blades Included rip fence is accurate
Cons	Brake does not stop blade immediately No safety switch	Packaged blades wear out quickly Control placement may make it difficult to grip
	Check Price	Check Price