Galax Pro GP766V vs. Worx WX429L
Thinking about a new circular saw? Compare the features of the Galax Pro GP766V and Worx WX429L and make an informed purchase!
Let’s take a look at these two circular saws: the Galax Pro GP766V and the Worx WX429L.
Features & Benefits
You can read our roundup of the best compact circular saws.
Power & Motor
Both saws are corded and run on 120 V. The GP766V draws 5.8 amps. The WX429L draws 4 amps. Standard U.S. residential circuits are 120 V, 15 A, which will support either of the products.
Both circular saws have motors that spin at 3500 rpm. Don’t get too caught up in these numbers, since the manufacturers measure them under ideal conditions, and they don’t have a meaningful impact on the saw’s real-world ability to handle different material.
The GP766V has a direct-drive motor. The WX429L has a direct drive motor. Direct-drive motors are usually lighter than other styles, but their side mounting makes the saw a little harder to control.
Blades & Capacity
Both saws accept 4 1/2” diameter blades and have a 3/8” arbor.
Both products can bevel up to 45°, can cut up to 1 11/16” deep at an angle of 90°, and are able to cut up to 1 1/8” at a 45° angle.
Both circular saws have the blade on the left side of the saw. Right-handers sometimes find it easier to see and control blades mounted to the left, while left-handers might find the same true for right-mounted blades.
Pros & Cons
Let’s take a look at some of the pluses and minuses of these products.
For the Galax Pro:
Pros
- Includes both 24- and 40-tooth blades
- Included rip fence is accurate
Cons
- Packaged blades wear out quickly
- Control placement may make it difficult to grip
For the Worx:
Pros
- Includes rip fence
- Dust port for connecting to a shop vacuum
Cons
- Rip fence is tricky to keep accurate when tightening
- Struggles to cut through full 2x products
Comparison Chart
Here’s a full side-by-side comparison of these products’ specs. You can view comparisons of the Galax Pro GP766V with other products
| Galax Pro GP766V | Worx WX429L | |
|---|---|---|
| | |
| Brand | Galax Pro | Worx |
| Power Type | corded | corded |
| Power - Voltage | 120 V | 120 V |
| Power - Amps | 5.8 A | 4 A |
| No-load RPM | 3500 rpm | 3500 rpm |
| Blade Diameter | 4 1/2” | 4 1/2” |
| Maximum Bevel | 45° | 45° |
| Depth of Cut (at 90°) | 1 11/16” | 1 11/16” |
| Depth of Cut (at 45°) | 1 1/8” | 1 1/8” |
| Arbor Size | 3/8” | 3/8” |
| Weight | 6.6 lbs | 4.4 lbs |
| Blade - Side | left | left |
| Drive Mechanism | direct-drive | direct drive |
| Pros |
|
|
| Cons |
|
|