Metabo HPT C10RJS vs. Ryobi RTS12

Let’s take a look at these two table saws: the Metabo HPT C10RJS and the Ryobi RTS12. To get more details, read our full reviews of the Metabo HPT C10RJS and of the Ryobi RTS12.

Features & Benefits

You can read our complete guide to buying a table saw.

Related: Table Saw Buying Guide: What to Look For

Power & Motor

Both products are corded, run on 120 V, and draw 15 amps. Standard U.S. residential circuits are 120 V, 15 A, which will support either of the table saws.

The C10RJS motor spins at 4500 rpm and the RTS12 motor spins at 5000 rpm. Don’t get too caught up in these numbers, since the manufacturers measure them under ideal conditions, and they don’t have a direct impact on the saw’s real-world ability to handle different material.

Blade Compatibility

Both saws accept 10” diameter blades and have a 5/8” arbor. 10” is a very common diameter for table saw blades, which means you should be able to find a huge variety of blades. Most 8-to-10” blades have a 5/8” arbor hole, so this size of arbor won’t limit your options.

The Metabo HPT takes dado blades up to 13/16” thick. The Ryobi accepts dado blades up to 1/2” thick.

Size & Capacity

The Metabo HPT has 35” of rip capacity to the right of the blade and has 22” of rip capacity to the left side. The Ryobi has 12” of rip capacity to the right of the blade and has 8” of rip capacity to the left side. In general, more rip capacity is better, but it typically also means a larger, heavier saw. Think about what types of rip cuts you’ll be making and choose the right size saw for you.

Both products can bevel the blade up to 45°. The C10RJS is able to cut up to 3 1/8” at a 90° angle and will cut up to 2 1/4” deep at 45°. The RTS12 can cut up to 3” at an angle of 90° and is able to cut up to 2 1/2” deep at a 45° angle.

The table on the Metabo HPT has a width of 28 3/4” and a depth of 22”. The table on the Ryobi has a width of 27.36” and a depth of 30 1/2”.

Pros & Cons

Let’s take a look at some of the pluses and minuses of these products.

For the Metabo HPT:

For the Ryobi:

Comparison Chart

Here is a full side-by-side comparison of these products’ specs. If you want more details, go to our full reviews of the Metabo HPT C10RJS and of the Ryobi RTS12. You can view comparisons of the Metabo HPT C10RJS with other products

	Metabo HPT C10RJS	Ryobi RTS12
Brand	Metabo HPT	Ryobi
Power Type	corded	corded
Power - Voltage	120 V	120 V
Power - Amps	15 A	15 A
Power - HP		3 hp
Table Dimensions	28 3/4” W × 22” D	27.36” W × 30 1/2” D
Miter Slot Dimensions	3/4” W × 3/8” D
No-load RPM	4500 rpm	5000 rpm
Rip Capacity (Right)	35”	12”
Rip Capacity (Left)	22”	8”
Blade Diameter	10”	10”
Maximum Bevel	45°	45°
Depth of Cut (at 90°)	3 1/8”	3”
Depth of Cut (at 45°)	2 1/4”	2 1/2”
Maximum Dado Width	13/16”	1/2” (with optional throat insert)
Arbor Size	5/8”	5/8”
Dimensions		14” (without stand) H
Weight	96 lbs (including stand)	51 lbs
Pros	Wide stand gives good stability Motor is powerful enough to handle thick or dense material Quality miter gauge 35” rip width is the largest in its class Extremely flat table All-terrain tread on tires	Powerful motor compared to similarly-priced saws Can accept dado blades with optional throat insert
Cons	Blade may need aligning out of the box, a process not covered by the manual Miter gauge does not store tightly in storage, can fall out during transport Axle can bend if not careful when going over obstacles Assembly instructions confusing for less experienced users	Stand is not very sturdy, so use caution when operating Only one miter slot limits flexibility and use of jigs and sleds
Included Accessories	Folding rolling stand 10” 40-tooth carbide-tipped blade Telescoping table extension for outfeed support Blade guard assembly Push stick Miter gauge assembly Blade guard Rip fence assembly
	Check Price	Check Price