Galax Pro GP766V vs. Worx WX439L

Let’s compare these two circular saws: the Galax Pro GP766V and the Worx WX439L.

Features & Benefits

You can read our roundup of the best compact circular saws.

Power & Motor

Both products are corded and run on 120 V. The GP766V draws 5.8 amps. The WX439L draws 4.5 amps. Standard U.S. residential circuits are 120 V, 15 A, which will support either of the saws.

The GP766V has a motor that spins at 3500 rpm and the WX439L has a motor that spins at 4100 rpm. But you shouldn’t get too caught up in the RPM numbers, since the manufacturers test them under ideal conditions, and they don’t have a direct correlation with the saw’s real-world ability to handle various types of material.

The GP766V has a direct-drive motor. The WX439L has a direct drive motor. Direct-drive motors are usually lighter than other styles, but their side mounting makes the saw a little harder to control.

Blades & Capacity

Both circular saws accept 4 1/2” diameter blades and have a 3/8” arbor.

Both products can bevel up to 45°, can cut up to 1 11/16” at an angle of 90°, and are able to cut up to 1 1/8” deep at a 45° angle.

Both saws have the blade mounted on the left side of the saw. Right-handers sometimes find it easier to see and control blades mounted to the left, while left-handers might find the same true for right-mounted blades.

Pros & Cons

Let’s take a look at some of the pluses and minuses of these products.

For the GP766V:

For the Worx:

Comparison Chart

Here’s a full side-by-side look at these products’ specs. You can view comparisons of the Galax Pro GP766V with other products

	Galax Pro GP766V	Worx WX439L
Brand	Galax Pro	Worx
Power Type	corded	corded
Power - Voltage	120 V	120 V
Power - Amps	5.8 A	4.5 A
No-load RPM	3500 rpm	4100 rpm
Blade Diameter	4 1/2”	4 1/2”
Maximum Bevel	45°	45°
Depth of Cut (at 90°)	1 11/16”	1 11/16”
Depth of Cut (at 45°)	1 1/8”	1 1/8”
Arbor Size	3/8”	3/8”
Weight	6.6 lbs	3.97 lbs
Blade - Side	left	left
Drive Mechanism	direct-drive	direct drive
Pros	Includes both 24- and 40-tooth blades Included rip fence is accurate	Slimmer handle than its predecessor is easier to grip Includes rip fence Dust port for connecting to a shop vacuum
Cons	Packaged blades wear out quickly Control placement may make it difficult to grip	Rip fence is tricky to keep accurate when tightening Struggles to cut through full 2x products
	Check Price	Check Price