Hychika MS-85C vs. Skilsaw SPT77WML-01

Considering a new circular saw? Compare the features of the Hychika MS-85C and Skilsaw SPT77WML-01 in order to make an informed purchase!

Well take a look at these two circular saws: the Hychika MS-85C and the Skilsaw SPT77WML-01.

Hychika MS-85C
Skilsaw SPT77WML-01

Features & Benefits

You can read more in our roundup of the best compact circular saws and the best full-size circular saws.

Power & Motor

Both saws are corded and run on 120 V. The MS-85C draws 4 amps. The SPT77WML-01 draws 15 amps. Standard U.S. residential circuits are 120 V, 15 A, which will support either of the products.

The MS-85C has a motor that spins at 4500 rpm and the SPT77WML-01 has a motor that spins at 5300 rpm. You shouldnt get too caught up in the RPM numbers, since the manufacturers test them under ideal conditions, and they dont have a meaningful correlation with the saws real-world ability to handle various types of material.

The MS-85C has a direct-drive motor. The SPT77WML-01 has a worm-drive motor. Direct-drive motors are usually lighter than other styles, but their side mounting makes the saw a little harder to control. Worm-drive motors are longer and heavier, but often more powerful and easier to control due to the weight being more centered.

Blades & Capacity

The MS-85C accepts 3 3/8 diameter blades and has a 3/8 arbor. The SPT77WML-01 takes 7 1/4 diameter saw blades and has a 5/8 arbor. Most 8-to-10blades have a 5/8arbor hole, so this size arbor maximizes blade compatibility.

The MS-85C can bevel its blade up to 0° and can cut up to 1 deep at a 90° angle. The SPT77WML-01 can bevel up to 53°, can cut up to 2 3/8 at a 90° angle, and can cut up to 1 15/16 deep at a 45° angle.

When beveling the saw, most circular saws will have positive stops at common angles such as 45° and 90°. This ensures you are making precise cuts. Some saws have additional stops at other angles.

The Skilsaw has stops at 45°.

Both circular saws have the blade mounted on the left side of the unit. Right-handers sometimes find it easier to see and control blades mounted to the left, while left-handers might find the same true for right-mounted blades.

Pros & Cons

Lets take a look at some of the pluses and minuses of these products.

For the SPT77WML-01:

Pros

  • Lots of torque for cutting difficult material
  • Good build quality
  • Blade-left design provides good visibility
  • Easy to track straight cut lines

Cons

  • Heavier than most direct-drive saws

Comparison Chart

Below is a full side-by-side look at these products’ specs. You can view comparisons of the Hychika MS-85C with other products

and comparisons of the Skilsaw SPT77WML-01 with other products.

Hychika MS-85CSkilsaw SPT77WML-01
Hychika MS-85C
Skilsaw SPT77WML-01
BrandHychikaSkilsaw
Power Typecordedcorded
Power - Voltage120 V120 V
Power - Amps4 A15 A
No-load RPM4500 rpm5300 rpm
Blade Diameter3 3/8”7 1/4”
Maximum Bevel53°
Depth of Cut (at 90°)1”2 3/8”
Depth of Cut (at 45°)n/a1 15/16”
Arbor Size3/8”5/8”
Dimensions19 1/2” L × 7” H
Weight7 lbs11.5 lbs
Blade - Sideleftleft
Drive Mechanismdirect-driveworm-drive
Stopsn/a45°
Warranty1 year
Pros
  • Lots of torque for cutting difficult material
  • Good build quality
  • Blade-left design provides good visibility
  • Easy to track straight cut lines
Cons
  • Heavier than most direct-drive saws
We use cookies and other tracking technologies to analyze our website traffic, to understand where our visitors are coming from, and to improve your browsing experience on our website.
As an Amazon Associate, I earn from qualifying purchases.