Metabo HPT C10RJS vs. Ridgid R4520

Let’s compare these two table saws: the Metabo HPT C10RJS and the Ridgid R4520. To get more detailed information, read our full review of the Metabo HPT C10RJS.

Features & Benefits

You can read our complete guide to buying a table saw.

Related: Table Saw Buying Guide: What to Look For

Power & Motor

Both table saws are corded and run on 120 V. The C10RJS draws 15 amps. The R4520 draws 13 amps. Standard U.S. residential circuits are 120 V, 15 A, which will support either of the saws.

The C10RJS has a motor that spins at 4500 rpm and the R4520 has a motor that spins at 3450 rpm. But you shouldn’t get too caught up in the RPM numbers, since the manufacturers test them under ideal conditions, and they don’t have a direct correlation with the saw’s real-world ability to handle various types of material.

Blade Compatibility

Both products accept 10” diameter blades and have a 5/8” arbor. Ten inches is a very common size for table saw blades, which means it shouldn’t be a problem to find a huge variety of blades. Most 8-to-10” blades have a 5/8” arbor hole, so this size of arbor won’t limit your options.

Both table saws take dado blades up to 13/16” thick. The Ridgid accepts dado blades up to 6” in diameter.

Size & Capacity

The Metabo HPT can rip up to 35” of material on the right of the blade and has 22” of rip capacity on the left side. The Ridgid has 30” of rip capacity on the right and has 15” of rip capacity on the left side. Generally speaking, a larger rip capacity is better, but it often also means a larger (and heavier) saw. Think about how big of rip cuts you’ll be making to help choose the right size saw for you.

Both saws will cut up to 2 1/4” at 45°. The C10RJS can bevel the blade up to 45° and can cut up to 3 1/8” deep at an angle of 90°. The R4520 can bevel its blade up to 4° and is able to cut up to 3 1/4” at a 90° angle.

The table on the Metabo HPT is 28 3/4” wide and 22” deep. The table on the Ridgid is 40” wide and 27” deep.

Pros & Cons

Let’s take a look at some of the pluses and minuses of these products.

For the C10RJS:

For the Ridgid:

Comparison Chart

Here is a full side-by-side look at these products’ specs. For more details, check out our full review of the Metabo HPT C10RJS. You can view comparisons of the Metabo HPT C10RJS with other products

	Metabo HPT C10RJS	Ridgid R4520
Brand	Metabo HPT	Ridgid
Power Type	corded	corded
Power - Voltage	120 V	120 V
Power - Amps	15 A	13 A
Table Dimensions	28 3/4” W × 22” D	40” W × 27” D
Miter Slot Dimensions	3/4” W × 3/8” D	3/4” W × 3/8” D
No-load RPM	4500 rpm	3450 rpm
Rip Capacity (Right)	35”	30”
Rip Capacity (Left)	22”	15”
Blade Diameter	10”	10”
Maximum Bevel	45°	4°
Depth of Cut (at 90°)	3 1/8”	3 1/4”
Depth of Cut (at 45°)	2 1/4”	2 1/4”
Maximum Dado Width	13/16”	13/16”
Arbor Size	5/8”	5/8”
Dust Port Diameter		4”
Weight	96 lbs (including stand)	267 lbs
Warranty		lifetime; if registered within 90 days of purchase
Pros	Wide stand gives good stability Motor is powerful enough to handle thick or dense material Quality miter gauge 35” rip width is the largest in its class Extremely flat table All-terrain tread on tires	Cast iron table for maximum precision Usually available at a very good price Stable and nearly vibration-free
Cons	Blade may need aligning out of the box, a process not covered by the manual Miter gauge does not store tightly in storage, can fall out during transport Axle can bend if not careful when going over obstacles Assembly instructions confusing for less experienced users	Occasional reports of defective trunnions causing alignment problems
Included Accessories	Folding rolling stand 10” 40-tooth carbide-tipped blade Telescoping table extension for outfeed support Blade guard assembly Push stick Miter gauge assembly Blade guard Rip fence assembly
	Check Price	Check Price