DeWalt DWE7485 vs. Metabo HPT C10RJS

Thinking about a new table saw? Compare the features of the DeWalt DWE7485 and Metabo HPT C10RJS and make an informed purchase!

Let’s take a look at these two table saws: the DeWalt DWE7485 and the Metabo HPT C10RJS. If you want more details, check out our full reviews of the DeWalt DWE7485 and of the Metabo HPT C10RJS.

Features & Benefits

You can read more in our complete guide to buying a table saw.

Power & Motor

Both table saws are corded, run on 120 V, and draw 15 amps. Standard U.S. residential circuits are 120 V, 15 A, which will support either of the products.

The DWE7485 motor spins at 5800 rpm and the C10RJS motor spins at 4500 rpm. But don’t get too caught up in these numbers, since the manufacturers measure them under ideal conditions, and they don’t have a direct impact on the saw’s real-world ability to handle different material.

Blade Compatibility

Both saws have a 5/8” arbor. The DWE7485 accepts 8 1/4” diameter blades. The C10RJS takes 10” diameter blades. 10” is the most common diameter for table saw blades, so you’ll be able to find a huge variety of blades. Most 8-to-10” blades have a 5/8” arbor hole, so this size arbor maximizes blade compatibility.

The Metabo HPT accepts dado blades up to 13/16” thick. The DeWalt doesn’t accept dado blades. For woodworkers, this might be a significant deficiency. If you anticipate wanting to use dado blades, you might want to look at a different model.

Size & Capacity

The DeWalt has 24 1/2” of rip capacity to the right side of the blade and has 12” of rip capacity to the left of the blade. The Metabo HPT has 35” of rip capacity to the right side and has 22” of rip capacity to the left. All else being equal, more rip capacity is better, but it typically also means a larger, heavier saw. Think about what types of rip cuts you’ll be making and choose the right size saw for you.

Both table saws can bevel their blades up to 45°. The DWE7485 can cut up to 2 9/16” deep at a 90° angle and can cut up to 1 3/4” at a 45° angle. The C10RJS can cut up to 3 1/8” deep at a 90° angle and can cut up to 2 1/4” at a 45° angle.

The table on the DeWalt has a width of 22 3/4” and a depth of 22 3/4”. The table on the Metabo HPT has a width of 28 3/4” and a depth of 22”.

Pros & Cons

Let’s take a look at some of the pluses and minuses of these products.

For the DeWalt:

Pros

Rack-and-pinion fence is easy to operate
Light and easy to move

Cons

Does not support dado blades
Included blade is construction-quality, needs upgrading for woodworking

For the Metabo HPT:

Pros

Wide stand gives good stability
Motor is powerful enough to handle thick or dense material
Quality miter gauge
35” rip width is the largest in its class
Extremely flat table
All-terrain tread on tires

Cons

Blade may need aligning out of the box, a process not covered by the manual
Miter gauge does not store tightly in storage, can fall out during transport
Axle can bend if not careful when going over obstacles
Assembly instructions confusing for less experienced users

Comparison Chart

Below is a full side-by-side comparison of these products’ specs. If you want more details, check out our full reviews of the DeWalt DWE7485 and of the Metabo HPT C10RJS. You can view comparisons of the DeWalt DWE7485 with other products

and comparisons of the Metabo HPT C10RJS with other products

	DeWalt DWE7485	Metabo HPT C10RJS

Brand	DeWalt	Metabo HPT
Power Type	corded	corded
Power - Voltage	120 V	120 V
Power - Amps	15 A	15 A
Table Dimensions	22 3/4” W × 22 3/4” D	28 3/4” W × 22” D
Miter Slot Dimensions	3/4” W × 3/8” D	3/4” W × 3/8” D
Miter Slot Shape	T-slot
No-load RPM	5800 rpm	4500 rpm
Rip Capacity (Right)	24 1/2”	35”
Rip Capacity (Left)	12”	22”
Blade Diameter	8 1/4”	10”
Maximum Bevel	45°	45°
Depth of Cut (at 90°)	2 9/16”	3 1/8”
Depth of Cut (at 45°)	1 3/4”	2 1/4”
Maximum Dado Width		13/16”
Arbor Size	5/8”	5/8”
Dust Port Diameter	2 1/2”
Dimensions	13” H
Weight	46 lbs	96 lbs (including stand)
Pros	Rack-and-pinion fence is easy to operate Light and easy to move	Wide stand gives good stability Motor is powerful enough to handle thick or dense material Quality miter gauge 35” rip width is the largest in its class Extremely flat table All-terrain tread on tires
Cons	Does not support dado blades Included blade is construction-quality, needs upgrading for woodworking	Blade may need aligning out of the box, a process not covered by the manual Miter gauge does not store tightly in storage, can fall out during transport Axle can bend if not careful when going over obstacles Assembly instructions confusing for less experienced users
Included Accessories	Saw blade Rip fence Miter gauge Modular guard system Adjustment wrenches	Folding rolling stand 10” 40-tooth carbide-tipped blade Telescoping table extension for outfeed support Blade guard assembly Push stick Miter gauge assembly Blade guard Rip fence assembly
	Check Price	Check Price